2021-08-28 12:01:34
浏览:
Outdoor LED lamp wiring first consider the use of the environment, outdoor to consider many factors, waterproof and dustproof, high temperature resistance, aging resistance and so on. There is no good protection at the cable connection, and many safety accidents may occur in use. Therefore, protective measures will be taken under normal circumstances.
Our high-power LED casting lights are mostly used in a variety of outdoor environments, such as under the trees in landscaping, bushes and pools, so we in these wet and sun and rain in the harsh environment how to protect the outdoor LED casting LED floodlight wiring waterproof? First of all, the standard protection level of our lamps is IP65-IP68, that is, the lamps have the function of dustproof and rainproof, but they cannot reach the level of soaking in water. Therefore, we must pay attention to the installation. For the exposed wiring, we usually connect it directly with the main line at the scene, and the leading wire of the lamps is about 30-50cm long. How to ensure water resistance and leakage after connecting with the main line connector? Our engineering solutions are:
1. A waterproof terminal box is installed in the terminal box at the wiring position of the pipe threading, which can play a double protection.
2. The simple way is to first use insulation tape to wrap the joint and then waterproof tape to wrap a layer of insulation tape at the wiring junction. In general, it is completely reliable in outdoor waterproof;
3, the use of professional waterproof wiring connector, connector and connector inside both ends are tightened, the general waterproof connector protection level can also reach IP67 or above,
The general voltage of led line lamp is AC220V, DC12V and DC24V, so it is necessary to choose the appropriate switching power supply, and the size of the power supply is determined according to the power of the LED lamp strip and the connection length. It should be noted that DC12V and DC24V must not be connected to AC220V, otherwise all the lamp beads will burn out. DC12V cannot be connected to the control power supply of DC24V. Otherwise, the power will increase more than twice, but also easy to burn the lamp beads. The AC220V lamp belt can be directly connected to the mains. RGB colorful LED light belts need to use a controller to achieve changing effects, generally using 4 lines to distinguish black, red, green, blue. The colorful light bar is generally common anode, that is, there is a +12V black line on the light bar, the others are negative, RGB access corresponding to the red, green and blue interface or power line.
The choice of LED lamp driving power
LED lamp power supply in the choice I think mainly from the power supply output voltage, output current, and the corresponding wattage to consider. LED power supply generally has a constant current source output, there are also two types of constant voltage source output, first from the constant current source output LED power supply, we mainly consider its output voltage
Street lamp manufacturers check the battery voltage method
In the process of selecting a stable led solar street lamp, we first clean the solar street lamp, all the places where the battery silos are placed, these concrete battery silos have a lot of different dirt, make sure that there is no dirt in the drain hole, and then observe whether the battery silos are damaged. In addition, the lamp manufacturer checks the battery voltage of the whole device to see if everything is normal.
What are the common wiring methods of outdoor LED lamps
Outdoor LED lamp wiring first consider the use of the environment, outdoor to consider many factors, waterproof and dustproof, high temperature resistance, aging resistance and so on. There is no good protection at the cable connection, and many safety accidents may occur in use. Therefore, protective measures will be taken under normal circumstances.
LED light strip purchase knowledge
Because the led light belt can be used for decoration, at the same time the decorative effect is relatively good. In recent years, many people have been buying this product. But also see that there are many types and styles of light strips on the market, how to choose?